AFM34

TA MARU : the distributor of Victor Reinz in Taiwan

Made in Germany. AFM34 is the most successful material in the product line of Victor Reinz.

AFM34 is an asbestos-free material. It contains aramide fibers, inorganic fillers and other high-temperature resistant substances which are bonded with high strength and especially gas-tight under increased pressure and increased temperature.

AFM34 does not contain any physiologically harmful substances or colour pigments.

AFM34 exhibits high tensile strength plus stress and shearing resistance.

The material is ideally suited for sealing gases and fluids, e.g. oils, solvents, fuels, Freons, liquid gases, water/antifreeze mixtures,
saline solutions and many other media. It is also suitable for sealing hot water and steam up to approx. 200 °C in stationary applications and with an installation surface pressure of at least 50 N/mm². Please consult us if you have a specific application.

Other characteristic properties of the material are excellent temperature resistance, stress resistance under high operating pressure, and ease of handling.

Applications:

• for DIN and ANSI flanged joints, apparatus, pumps, fittings and pipelines in industrial plants

• for fittings with very narrow sealing surfaces, e.g. in gas and hot water units, solar panels, convection radiators and couplings, etc

• for sealed joints in IC engines subject to high mechanical and thermal stress (oil filters, intake manifolds, water, fuel & vacuum pumps, etc.)

• for transmissions, gearboxes, refrigerating & air compressors, etc

Since AFM 34 is physiologically safe, it is also suitable for use in contact with drinking water & foodstuffs, and for sealing highly pure, pollutant-sensitive products such as paint bases, vitamins, etc.

Surfaces

As standard, both sides of AFM 34 are coated with a non-stick, high-friction layer that greatly facilitates disassembly.

In most cases, additional surface treatment is unnecessary.

However, a graphite coating on one or both sides of the gasket is recommended when used with components that rotate on the gasket during assembly, e.g. in threaded couplings, radiator plugs, etc., as a low friction value is required in these cases.